Disconnect power resistor in battery backup
Important
Contact support before starting.
Do not carry out this instruction without approval from Millteknik's support.
Work performed without approval may result in damage and void the warranty.
Support
Do you need help with installation or connections? Our support phone is available: Monday-Thursday 08: 00-16: 00 and Fridays 08: 00-15: 00. Telephone support is closed between 11: 30-13: 15.
You will find answers to many questions at: www.milleteknik.se/support
Phone: +46 31-340 02 30
Support is open: Monday-Thursday 08:00-16:00, Fridays 08:00-15:00. Closed 11:30-13:15.
Spare parts
Contacted support for questions about spare parts.
Support after the warranty period
Milleteknik provides support during the life of the product, but no longer than 10 years after the date of purchase. Replacement for an equivalent product may occur if the manufacturer deems that repair is not possible. Costs for support and replacement are added after the warranty period has expired.
Questions about product performance?
Contact sales: 46 31-340 02 30, e-mail: sales@milleteknik.se
Disconnect power resistors in battery backup with PRO1 board
Risk of damage if the cable to the power resistor is not removed
There is a risk of damage to the battery backup and surrounding equipment if the cable to the power resistor is not removed.
Warranty ceases to apply if cable in battery backup to power resistor is not removed.
PRO 1: Cable to be cut for units 3A-10A
In battery backup with PRO1 card, see below. The cable to be removed is to the left of the double pin connector, see marking below. The cable can be left hanging loose or tied with a cable tie in the plate.
 |
PRO 1: Cable to be cut for units 15A-25A
In battery backup with PRO1 card, see below. The cable to be removed is to the left of the double pin connector, see marking below. The cable can be left hanging loose or tied with a cable tie in the plate.
 |
Disconnect power resistors in battery backup with PRO2 board
Risk of damage if the cable to the power resistor is not removed
There is a risk of damage to the battery backup and surrounding equipment if the cable to the power resistor is not removed.
Warranty ceases to apply if cable in battery backup to power resistor is not removed.
PRO 2: Cable to be cut for units 3A-10A
In battery backup with PRO2 card, see below. The cable to be removed is to the right of the double pin connector, see marking below. The cable can be left hanging loose or tied with a cable tie in the plate.
 |
PRO 2: Cable to be cut for units 15A-25A
In battery backup with PRO2 card, see below. The cable to be removed is located to the right of the double-pin connector, see marking below. The cable can be left hanging loose or tied with a cable tie in the plate.
 |
Disconnect power resistors in battery backup with PRO3 board
Risk of damage if the cable to the power resistor is not removed
There is a risk of damage to the battery backup and surrounding equipment if the cable to the power resistor is not removed.
Warranty ceases to apply if cable in battery backup to power resistor is not removed.
PRO 3: Cable to be cut for units 5A-25A
In battery backup with PRO3 card, see below. The cable to be removed is located to the right of the double-pin connector, see marking below. The cable can be left hanging loose or tied with a cable tie in the plate.
 |
About translation of this document
User manual and other documents are in the original language in Swedish. Other languages may be machine translated and/or not reviewed, errors may occur.